section 15 Base metals and articles of base metal note

chapter 72 Iron and steel note

No.Stat.
Code
No.
N
A
C
C
S
Description
Tariff rate Tariff rate(EPA) Unit
General
Temporary
WTO
GSP
LDC
Singapore
Mexico
Malaysia
Chile
Thailand
Indonesia
Brunei
ASEAN
Philippines
Switzerland
Viet Nam
India
Peru
Australia
Mongolia
I
II
I.- PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms:
7201.10 Non-alloy pig iron containing by weight 0.5 % or less of phosphorus: Free (Free)
010 4 -Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Other:
091 1 --Containing by weight less than 1.6 % of silicon FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
099 2 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7201.20 000 5 Non-alloy pig iron containing by weight more than 0.5 % of phosphorus Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7201.50 000 3 Alloy pig iron; spiegeleisen Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.02 Ferro-alloys:
Ferro-manganese:
7202.11 000 5 Containing by weight more than 2 % of carbon 7.7% 6.3% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree1.8%Free3.2%5.2% KG
7202.19 000 4 Other 7.7% 6.3% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree1.8%FreeFree5.2% KG
Ferro-silicon:
7202.21 000 2 Containing by weight more than 55 % of silicon Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7202.29 000 1 Other 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7202.30 000 0 Ferro-silico-manganese 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.7%Free1.6%Free KG
Ferro-chromium:
7202.41 000 3 Containing by weight more than 4 % of carbon Free (5.3%) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7202.49 000 2 Other 7.2% 5.3% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.4%FreeFreeFree KG
7202.50 000 1 Ferro-silico-chromium 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%FreeFreeFree KG
7202.60 Ferro-nickel: 5.9% 3.3%
010 1 -Containing by weight less than 33 % of nickel 1.98% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 4 -Other 2.64% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7202.70 000 2 Ferro-molybdenum 3.9% 3.3% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%FreeFreeFree KG
7202.80 Ferro-tungsten and ferro-silico-tungsten:
010 2 1 Ferro-tungsten 2% (2%) Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.2%FreeFreeFree KG
020 5 2 Ferro-silico-tungsten 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%FreeFreeFree KG
Other:
7202.91 000 2 Ferro-titanium and ferro-silico-titanium 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%FreeFreeFree KG
7202.92 000 1 Ferro-vanadium 3% 2.5% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%Free1.3% KG
7202.93 000 0 Ferro-niobium Free (2.5%) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7202.99 Other: 3% 2.5%
010 4 -Ferro-phosphorus Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 0 -Other Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree0.3%FreeFreeFree KG
72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms:
7203.10 000 4 Ferrous products obtained by direct reduction of iron ore Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7203.90 000 1 Other Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10 000 2 Waste and scrap of cast iron Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Waste and scrap of alloy steel:
7204.21 000 5 Of stainless steel Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7204.29 000 4 Other Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7204.30 000 3 Waste and scrap of tinned iron or steel Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other waste and scrap:
7204.41 000 6 Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7204.49 000 5 Other Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7204.50 Remelting scrap ingots:
010 0 1 Of alloy steel 5.7% 4.7% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 3 2 Other 4.1% 3.4% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10 000 0 Granules Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Powders:
7205.21 Of alloy steel: Free (Free)
010 6 -Containing not less than 1 % but less than 5 % by weight of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 2 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7205.29 000 2 Other Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
II.- IRON AND NON-ALLOY STEEL
72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03):
7206.10 Ingots:
010 1 1 Containing by weight less than 0.6 % of carbon Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 4 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7206.90 Other:
010 5 1 Containing by weight less than 0.6 % of carbon Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 1 2 Other 4.6% 3.9% Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.07 Semi-finished products of iron or non-alloy steel:
Containing by weight less than 0.25 % of carbon:
7207.11 000 2 Of rectangular (including square) cross-section, the width measuring less than twice the thickness Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7207.12 000 1 Other, of rectangular (other than square) cross-section Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7207.19 000 1 Other Free (Free) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7207.20 Containing by weight 0.25 % or more of carbon:
1 Containing by weight less than 0.6 % of carbon: Free (Free)
011 4 -Billets FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
012 5 -Slabs FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 5 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 6 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10 In coils, not further worked than hot-rolled, with patterns in relief:
010 4 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 1 (1) Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 2 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other, in coils, not further worked than hot-rolled, pickled:
7208.25 Of a thickness of 4.75 mm or more:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 4 -Of a thickness of less than 6 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 5 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
020 6 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
030 2 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.26 Of a thickness of 3 mm or more but less than 4.75 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 3 -High tensile steel of a tensile strength of 490 MPa or more FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 4 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 6 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 0 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.27 Of a thickness of less than 3 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 2 -High tensile steel of a tensile strength of 490 MPa or more FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 3 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 5 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other, in coils, not further worked than hot-rolled:
7208.36 Of a thickness exceeding 10 mm:
010 6 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 3 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 4 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.37 Of a thickness of 4.75 mm or more but not exceeding 10 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 6 -Of a thickness of less than 6 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 0 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
020 1 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
030 4 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.38 Of a thickness of 3 mm or more but less than 4.75 mm:
010 4 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 1 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 2 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.39 Of a thickness of less than 3 mm:
010 3 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 0 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 1 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.40 Not in coils, not further worked than hot-rolled, with patterns in relief:
010 2 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
020 5 (1) Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
030 1 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other, not in coils, not further worked than hot-rolled:
7208.51 Of a thickness exceeding 10 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 6 -Of a thickness of not exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 0 -Of a thickness exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
(1) Having a minimum yield point of 355 MPa: 4.6% Free Free
021 2 -Of a thickness of not exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 3 -Of a thickness exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
(2) Other: 3.9% Free Free
031 5 -Of a thickness of not exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
039 6 -Of a thickness exceeding 50 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.52 Of a thickness of 4.75 mm or more but not exceeding 10 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 5 -Of a thickness of less than 6 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 6 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
(1) Having a minimum yield point of 355 MPa: 4.6% Free Free
021 1 -Of a thickness of less than 6 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 2 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
(2) Other: 3.9% Free Free
031 4 -Of a thickness of less than 6 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
039 5 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.53 Of a thickness of 3 mm or more but less than 4.75 mm:
010 3 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 0 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 1 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.54 Of a thickness of less than 3 mm:
010 2 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 6 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 0 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7208.90 000 5 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
In coils, not further worked than cold-rolled (cold-reduced):
7209.15 Of a thickness of 3 mm or more:
010 4 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 1 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 2 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.16 Of a thickness exceeding 1 mm but less than 3 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 4 -High tensile steel of a tensile strength of 340 MPa or more FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 5 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 0 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 1 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.17 Of a thickness of 0.5 mm or more but not exceeding 1 mm:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 3 -High tensile steel of a tensile strength of 340 MPa or more FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 4 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 6 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 0 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.18 Of a thickness of less than 0.5 mm:
010 1 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 5 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25 Of a thickness of 3 mm or more:
010 1 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 5 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.26 Of a thickness exceeding 1 mm but less than 3 mm:
010 0 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 4 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 5 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.27 Of a thickness of 0.5 mm or more but not exceeding 1 mm:
010 6 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 3 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 4 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.28 Of a thickness of less than 0.5 mm:
010 5 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 2 (1) Having a minimum yield point of 275 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 3 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7209.90 000 3 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated:
Plated or coated with tin:
7210.11 000 3 Of a thickness of 0.5 mm or more 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.12 000 2 Of a thickness of less than 0.5 mm 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.20 000 1 Plated or coated with lead, including terne-plate 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.30 Electrolytically plated or coated with zinc:
010 1 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 5 (1) Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Otherwise plated or coated with zinc:
7210.41 000 1 Corrugated 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.49 Other: 3.9% Free Free
010 3 -Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers) FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 6 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.50 Plated or coated with chromium oxides or with chromium and chromium oxides: 3.9% Free Free
010 2 -Tinfree steel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 5 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Plated or coated with aluminium:
7210.61 000 2 Plated or coated with aluminium-zinc alloys 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.69 000 1 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.70 000 0 Painted, varnished or coated with plastics 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7210.90 Other:
010 4 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 0 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated:
Not further worked than hot-rolled:
7211.13 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
010 2 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 6 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 0 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7211.14 Other, of a thickness of 4.75 mm or more:
010 1 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 5 (1) Having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7211.19 Other:
010 3 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 0 (1) Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 1 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Not further worked than cold-rolled (cold-reduced):
7211.23 000 3 Containing by weight less than 0.25 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7211.29 Other:
010 0 1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 3 2 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7211.90 000 6 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10 000 0 Plated or coated with tin 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7212.20 Electrolytically plated or coated with zinc:
010 0 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other:
021 4 (1) Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 5 (2) Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7212.30 000 1 Otherwise plated or coated with zinc 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7212.40 000 5 Painted, varnished or coated with plastics 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7212.50 Otherwise plated or coated: 3.9% Free Free
010 5 -Tinfree steel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 1 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7212.60 Clad:
010 2 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 5 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel:
7213.10 000 5 Containing indentations, ribs, grooves or other deformations produced during the rolling process 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7213.20 000 2 Other, of free-cutting steel 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7213.91 Of circular cross-section measuring less than 14 mm in diameter:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
-Containing by weight less than 0.25 % of carbon:
011 5 --Measuring less than 6 mm in diameter FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 6 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 0 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 0 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7213.99 Other:
020 6 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 6 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10 000 3 Forged 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7214.20 000 0 Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7214.30 000 4 Other, of free-cutting steel 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7214.91 Of rectangular (other than square) cross-section:
020 5 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 5 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7214.99 Other:
020 4 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 4 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.15 Other bars and rods of iron or non-alloy steel:
7215.10 000 1 Of free-cutting steel, not further worked than cold-formed or cold-finished 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7215.50 Other, not further worked than cold-formed or cold-finished:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
010 6 -Containing by weight less than 0.25 % of carbon FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 1 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 2 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7215.90 Other:
010 1 1 Containing by weight less than 0.6 % of carbon 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 4 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.16 Angles, shapes and sections of iron or non-alloy steel:
7216.10 000 6 U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21 000 2 L sections 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.22 000 1 T sections 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
7216.31 000 6 U sections 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.32 000 5 I sections 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.33 000 4 H sections 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.40 000 4 L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.50 000 1 Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61 000 4 Obtained from flat-rolled products 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.69 000 3 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7216.91 000 2 Cold-formed or cold-finished from flat-rolled products 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7216.99 000 1 Other 3.9% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.17 Wire of iron or non-alloy steel:
7217.10 Not plated or coated, whether or not polished:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
010 0 -Containing by weight less than 0.25 % of carbon FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 2 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 3 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7217.20 Plated or coated with zinc:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
-Containing by weight less than 0.25 % of carbon:
010 4 --Of any cross sectional dimension not exceeding 1.5 mm FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 6 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 0 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
099 2 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7217.30 Plated or coated with other base metals:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
-Containing by weight less than 0.25 % of carbon:
011 2 --Solid wire for gas sealed arc welding FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 3 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 4 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
099 6 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7217.90 Other:
1 Containing by weight less than 0.6 % of carbon: 3.9% Free Free
011 5 -Containing by weight less than 0.25 % of carbon FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 6 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
090 0 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
III.- STAINLESS STEEL
72.18 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10 000 2 Ingots and other primary forms 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7218.91 000 5 Of rectangular (other than square) cross-section 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7218.99 000 4 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more:
Not further worked than hot-rolled, in coils:
7219.11 000 6 Of a thickness exceeding 10 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.12 Of a thickness of 4.75 mm or more but not exceeding 10 mm: 4.6% Free Free
010 1 -Of chrome series, not containing nickel, whether or not containing other elements FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 2 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 3 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 6 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.13 Of a thickness of 3 mm or more but less than 4.75 mm: 4.6% Free Free
010 0 -Of chrome series, not containing nickel, whether or not containing other elements FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 1 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 2 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 5 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.14 000 3 Of a thickness of less than 3 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Not further worked than hot-rolled, not in coils:
7219.21 000 3 Of a thickness exceeding 10 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.22 000 2 Of a thickness of 4.75 mm or more but not exceeding 10 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.23 000 1 Of a thickness of 3 mm or more but less than 4.75 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.24 000 0 Of a thickness of less than 3 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Not further worked than cold-rolled (cold-reduced):
7219.31 000 0 Of a thickness of 4.75 mm or more 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.32 Of a thickness of 3 mm or more but less than 4.75 mm: 4.6% Free Free
010 2 -Of chrome series, not containing nickel, whether or not containing other elements FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 3 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 4 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
022 0 --Containing by weight 7 % or more but less than 10 % of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
023 1 --Containing by weight 10 % or more of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.33 Of a thickness exceeding 1 mm but less than 3 mm: 4.6% Free Free
-Of chrome series, not containing nickel, whether or not containing other elements:
011 2 --Containing by weight less than 12 % of chromium FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 3 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 2 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 3 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
022 6 --Containing by weight 7 % or more but less than 10 % of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
023 0 --Containing by weight 10 % or more of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.34 Of a thickness of 0.5 mm or more but not exceeding 1 mm: 4.6% Free Free
-Of chrome series, not containing nickel, whether or not containing other elements:
011 1 --Containing by weight less than 12 % of chromium FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
019 2 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 1 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 2 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
022 5 --Containing by weight 7 % or more but less than 10 % of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
023 6 --Containing by weight 10 % or more of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.35 Of a thickness of less than 0.5 mm: 4.6% Free Free
010 6 -Of chrome series, not containing nickel, whether or not containing other elements FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 0 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 1 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
022 4 --Containing by weight 7 % or more but less than 10 % of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
023 5 --Containing by weight 10 % or more of nickel FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7219.90 000 4 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm:
Not further worked than hot-rolled:
7220.11 000 4 Of a thickness of 4.75 mm or more 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7220.12 000 3 Of a thickness of less than 4.75 mm 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7220.20 Not further worked than cold-rolled (cold-reduced): 4.6% Free Free
010 5 -Of chrome series, not containing nickel, whether or not containing other elements FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
-Of nickel series, containing nickel, whether or not containing other elements:
--Containing by weight less than 7 % of nickel:
025 6 ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
026 0 ---Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 3 --Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7220.90 000 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.21
7221.00 000 6 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.22 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11 000 0 Of circular cross-section 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7222.19 000 6 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7222.20 000 5 Bars and rods, not further worked than cold-formed or cold-finished 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7222.30 000 2 Other bars and rods 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7222.40 000 6 Angles, shapes and sections 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.23
7223.00 000 2 Wire of stainless steel 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
72.24 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10 Ingots and other primary forms:
010 0 1 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 3 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
030 6 3 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7224.90 Other:
010 4 1 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 0 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
030 3 3 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more:
Of silicon-electrical steel:
7225.11 000 1 Grain-oriented 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.19 000 0 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.30 Other, not further worked than hot-rolled, in coils:
100 5 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 0 2 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
3 Other: 4.6% Free Free
910 3 -Pickled FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
990 6 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.40 Other, not further worked than hot-rolled, not in coils:
100 2 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 4 2 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
3 Other: 4.6% Free Free
910 0 -Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
990 3 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.50 Other, not further worked than cold-rolled (cold-reduced):
100 6 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 1 2 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
900 1 3 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7225.91 Electrolytically plated or coated with zinc:
100 0 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel 6.3% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 2 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
300 4 3 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
900 2 4 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.92 Otherwise plated or coated with zinc:
100 6 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel 6.3% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 1 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
300 3 3 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
900 1 4 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7225.99 Other:
100 6 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel 6.3% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 1 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
300 3 3 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
900 1 4 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm:
Of silicon-electrical steel:
7226.11 000 6 Grain-oriented 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7226.19 000 5 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7226.20 000 4 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
Other:
7226.91 Not further worked than hot-rolled:
010 6 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 2 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7226.92 Not further worked than cold-rolled (cold-reduced):
010 5 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 1 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7226.99 Other:
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel: 6.3% Free Free
110 0 -Plated or coated with zinc FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
190 3 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 6 2 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
900 6 3 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10 000 5 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7227.20 000 2 Of silico-manganese steel 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7227.90 Other:
010 5 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
2 Other: 4.6% Free Free
021 2 -Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
029 3 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.10 000 3 Bars and rods, of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.20 000 0 Bars and rods, of silico-manganese steel 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.30 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
010 0 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 3 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.40 Other bars and rods, not further worked than forged:
010 4 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 0 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.50 Other bars and rods, not further worked than cold-formed or cold-finished:
010 1 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 4 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.60 Other bars and rods:
010 5 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 1 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.70 Angles, shapes and sections:
010 2 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
020 5 2 Other 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7228.80 000 3 Hollow drill bars and rods 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
72.29 Wire of other alloy steel:
7229.20 000 5 Of silico-manganese steel 4.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
7229.90 Other:
100 0 1 Of alloy tool steel 5.8% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
200 2 2 Of high speed steel 6.6% Free Free FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
3 Other: 4.6% Free Free
910 5 -Solid wire for gas sealed arc welding FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG
990 1 -Other FreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFreeFree KG